Bolt 300 3G-SDI/HDMI Trasmetitore ricevitore video

bolt-300-3g-sdi-hdmi-trasmetitore-ricevitore-video

Teradek Bolt PRO 300 3G-SDI / HDMI Specifiche tecniche

Trasmettitore Ricevitore
Video
Risoluzione video 1080p60/59.94/50/30/29.97/25/24/23.98
1080psf30/29.97/25/24/23.98
1080i60/59.94/50
720p60/59.94/50
480p59.94/576p50 (solo via porta HDMI)
480i(NTSC)/576i(PAL)  
Color sampling Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit con no video format conversion e FPGA v.1.1.0 o superiore);
RGB 4:4:4 (HDMI out, 8-bit color)
Ingressi 1 x 75 Ohm BNC
1 x Type A receptacle HDMI
no
Uscite 1 x 75 Ohm BNC(Loop-out) 1 x USB 3.0 micro B receptacle
1 x 75 Ohm BNC
1 x Type A receptacle HDMI
Delay(TX to RX) <0.001sec (quando no video format conversion è abilitato)
Audio
Supporto formato 48kHz 24-bit PCM
Wireless
Frequenza Non-DFS Frequenze:
US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP : 5.19 ~ 5.23 GHz
DFS Frequenze:
US : 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP : 5.27 ~ 5.67 GHz
RF power 17dBm EIRP 15dBm EIRP
Range fino a 300ft line of sight
Unicast / Multicast si si
Noise rejection coesiste con WiFi and 5GHz telefoni cordless
Power
Input 2-Pin Lemo 7-28 VDC 2-Pin Lemo 7-28 VDC
Batteria interna no no
Consumo1080p60) 6.5 Watts 8.2Watts
General  e
LCD screen no no
Menu joystick no yes
Dimensioni 1.06×2.61×4.42inches
(27.0×66.1×112.3mm)
1.0×3.5×5.8inches
(25.2×88.9×146.5mm)
Peso 9.2oz(262g) 12.2oz(346g)
Firmware Upgrade via Mini-USB
Operating temperature 0 ~ 50 deg-C
Chassis material Cap:Plastic
Body:Milled aluminum
Hot-shoe mount
Mountabilità Multiple mounting options con buco 1/4″